LEDs in my Honda SH :)

Arbiter · Post by **Arbiter** » Sun Nov 27, 2011 4:30 pm

With Bi-Xenon 35W 4,3k

blowpipe · Post by **blowpipe** » Fri Dec 02, 2011 9:09 am

Did you get this one from the same supplier on ebay?

Arbiter · Post by **Arbiter** » Sat Dec 03, 2011 2:28 am

I dont remember, but probably another one

Scootin2 · Post by **Scootin2** » Sat Dec 03, 2011 9:28 pm

What size bulbs are used for the amber signals on the Euro model? I can't find any info. Will these bulbs fit?

http://www.v-leds.com/Exterior-LED/Turn ... 4-1-2.html

blowpipe · Post by **blowpipe** » Thu Dec 15, 2011 7:34 am

Tried out the LED position lights today. Ok on one side, but the other I have problems with as the contacts seem only to function when the bulb is half way into the socket - once I try to install it back into the housing it fails.

They also seem pretty long, as once installed are almost flush with the plastic lens of the housing which worries me a little. Are there shorter LEDs on the market?

Arbiter · Post by **Arbiter** » Thu Dec 15, 2011 8:02 am

Scootin2 wrote:What size bulbs are used for the amber signals on the Euro model? I can't find any info. Will these bulbs fit?

http://www.v-leds.com/Exterior-LED/Turn ... 4-1-2.html

Yes, they probably will fit, but they probably have 2 FILAMENTS (and our honda supports one - central pin bulb)

Probably flasher in our hondas doesnt support LED bulbs, and it will no work with two led bulbs

Arbiter · Post by **Arbiter** » Thu Dec 15, 2011 8:06 am

our original bulbs

Arbiter · Post by **Arbiter** » Thu Dec 15, 2011 8:09 am

blowpipe wrote:Tried out the LED position lights today. Ok on one side, but the other I have problems with as the contacts seem only to function when the bulb is half way into the socket - once I try to install it back into the housing it fails.

They also seem pretty long, as once installed are almost flush with the plastic lens of the housing which worries me a little. Are there shorter LEDs on the market?

Yes, they are shorter, but those long fit for my scooter, so they should fit for your.

Probably one of your leds has no good contact (inside bulb). Try to repaire it with soldering. I bought about 20 different Leds ant one of them had such problem

blowpipe · Post by **blowpipe** » Thu Dec 15, 2011 11:46 am

I next tried to change the main bulb, but have made the mistake of having the Honda screen fitted before!

The guy at the garage said I really wouldn't want to fit it myself when I bought the bike, and now I can see why when I look at what it will take to remove it.

This will take a long time

Arbiter · Post by **Arbiter** » Thu Dec 15, 2011 1:44 pm

You need to unmount windshield, then mirrors, few screws on cockpit, and you have your H4 bulb;)

SHcooter.com

LEDs in my Honda SH :)

Re: LEDs in my Honda SH :)

Re: LEDs in my Honda SH :)

Re: LEDs in my Honda SH :)

Re: LEDs in my Honda SH :)

Re: LEDs in my Honda SH :)

Re: LEDs in my Honda SH :)

Re: LEDs in my Honda SH :)

Re: LEDs in my Honda SH :)

Re: LEDs in my Honda SH :)

Re: LEDs in my Honda SH :)