http://moto.arbiter.pl/galeria/motomufki
Handlebar Muffs
-
Arbiter
- Member
- Posts: 142
- Joined: Fri Aug 19, 2011 4:33 pm
- Location: Poland. Sh 125i 2010
- Contact:
-
blowpipe
- Member
- Posts: 39
- Joined: Sat Sep 10, 2011 11:40 am
Re: Handlebar Muffs
Just a word of warning fitting these!
When you cabletie the inner locking sleeve onto the accelorator handlebar, be careful not to push it too tightly against the end of the handlebar - it can cause the throttle to stick when operated.
Leave a few mm's gap and you'll be ok. I found out the hard way when I took my hand off the throttle on approaching a queue of cars expecting it to automatically decellerate; it didn't
. Had just enough time to get my hand back on and shut it down...
When you cabletie the inner locking sleeve onto the accelorator handlebar, be careful not to push it too tightly against the end of the handlebar - it can cause the throttle to stick when operated.
Leave a few mm's gap and you'll be ok. I found out the hard way when I took my hand off the throttle on approaching a queue of cars expecting it to automatically decellerate; it didn't
. Had just enough time to get my hand back on and shut it down...