Turn Signal alarm/buzzer
Posted: Wed Jun 03, 2020 1:57 pm
Has anyone modified their SH150 by adding an alarm/buzzer to the turn signal circuit? If so would they share what/how they did it?
In looking at the front turn signal circuits on my 2010 SH150i, I've noticed that the ground wire = green, the left turn signal wire is orange, and the right turn signal wire is blue. I have extra push on/keyed electrical connectors that match the stock 2.8mm ones, so could fabricate a circuit to power some small buzzers.
However, would like to see if anyone has already done a conversion and if modifying the circuit caused problems.
Thanks, Oldslow
In looking at the front turn signal circuits on my 2010 SH150i, I've noticed that the ground wire = green, the left turn signal wire is orange, and the right turn signal wire is blue. I have extra push on/keyed electrical connectors that match the stock 2.8mm ones, so could fabricate a circuit to power some small buzzers.
However, would like to see if anyone has already done a conversion and if modifying the circuit caused problems.
Thanks, Oldslow