Page 1 of 1

Minimum fuel required.

Posted: Fri Sep 08, 2017 4:36 pm
by YellowJacket
Just got my new to me SHi home yesterday but no owners manual with it. Can't find the DOT tag that should list the fuel octane required. Can anyone tell me what is needed? I'm almost out of gas out.

Re: Minimum fuel required.

Posted: Sat Sep 09, 2017 7:19 am
by TommyXP
Off hand.....Regular 87 octane...

Re: Minimum fuel required.

Posted: Sat Sep 09, 2017 8:01 am
by Mikey
Only BMWs are designed to take the most expensive fuel. Thanks but no thanks!

Re: Minimum fuel required.

Posted: Tue Sep 12, 2017 8:30 am
by YellowJacket
Back again with another question. When checking engine oil, do you screw the dipstick all the way in or just insert it into the hole? Depending on the make, both methods are used. Remember, I do not have an owners manual.

Re: Minimum fuel required.

Posted: Tue Sep 12, 2017 8:37 am
by TommyXP
Do not screw in, just rest it.......

Re: Minimum fuel required.

Posted: Tue Sep 12, 2017 11:12 am
by YellowJacket
Thanks Tom. I should have checked that before I ever rode it but forgot.

Re: Minimum fuel required.

Posted: Sat Sep 16, 2017 5:56 pm
by YellowJacket
Next Question, what is the size and weight of the stock rollers?

Re: Minimum fuel required.

Posted: Sun Sep 17, 2017 4:25 am
by TommyXP
Off-hand without using the "Search" function......12.4 grams :roll: ......with the size/limits listed in the front of the Factory Service Manual under Drive and Driven Pulley.....
http://shop.shspowersports.com/fiche_se ... veh=294296
If you need more info, once the Sun comes up, I could put a set of calipers to one.....

Re: Minimum fuel required.

Posted: Sun Sep 17, 2017 7:30 am
by YellowJacket
Please do. The manual gives the dia. only but I need the weight and length as well. Thanks, Vic

Re: Minimum fuel required.

Posted: Sun Sep 17, 2017 7:54 am
by TommyXP
A brand-spanking-new 'factory' roller weighs, according to my lil' digital pocket scale 12.4g or 0.430z.
And is .587" wide and .790" tall with an inner diameter of .510".......
Hope this helps.