SHcooter.com

Hi all,

About a year ago I decided to take apart my SH125i from 2008, because it had no power and made weird noises.
I made notes (but not enough..) and have a Haynes manual, but nevertheless I'm lost in re-connecting the (cooling) hoses from the engine. Especially there's one part of which I don't know what it does and where it should connect to (see attachment).

Can anyone tell my what this thing does and where I should connect it to?

thanks!

Yikes......The hose on the left, because of the coiled protection, appears that it would connect directly to the engine, of which you have a singular option....and then the other will be pointing to your only other option.
I am not familiar with the 125-2008 BUT this appears to be a problem that with a little Time and patience, will work itself out.
Good luck and stick with it.....

Thanks
The issue is that there are multiple options, but if this one is solved the rest falls into place Also it bothers me not to know what this thing is and does, but that is more a matter of principle

I am not certain....could that be a coolant pump, as the wires appear rather stout?
Hopefully someone with a 125 will chime in and educate us.......

Try the fowlers parts web site, navigate by make, model, year...
Some great exploded diagrams, along with the parts listings... they may help

Electronic thermostat???
Engine to thermostat to rad?
What do I know.

Do these images help ???

https://www.google.com/search?q=motore+ ... BgzDNf4gEM:

http://cirettomoto.altervista.org/blog/ ... rettyPhoto[product-gallery]/3/

Toni

Thanks for the suggestions! Based on the pictures I was able to figure out how to connect the part Very helpfull!

Good
Linus