Main stand replacement

Take a moment to introduce yourself, it is required to make at least one post as a new member,members with no posts will be automatically deleted after 2 days.
Post Reply
Radek
Member
Posts: 5
Joined: Mon Dec 25, 2017 9:28 am

Main stand replacement

Post by Radek » Mon Dec 25, 2017 10:57 am

Hi, I have replaced my main stand. There is problem, stand dont hold on in middle when its on. Just wonder where is problem. Its model 2006, cant find any video to see. Springs are there to hold stand to the frame when its off, but what makes stand not to move forward (towards front wheel). Stand is new so not damaged or so. Thank you for opinions, hope you understand what I talk about.

Here is link on video I have downloaded https://www.youtube.com/watch?v=P2hS3X7ASfk
Last edited by Radek on Sat Dec 30, 2017 5:22 pm, edited 2 times in total.

User avatar
TommyXP
Staff
Posts: 1181
Joined: Sun May 15, 2011 6:49 am
Location: Marine City, Michigan

Re: Main stand replacement

Post by TommyXP » Thu Dec 28, 2017 7:07 am

Sorry for the Holiday-delay in approving your posts....
At the moment, I can't imagine the problem.
How does the 'new' stand compare with the old?
Something very simple going on here.......
Freedom is not something you are given. Its something you take.

Radek
Member
Posts: 5
Joined: Mon Dec 25, 2017 9:28 am

Re: Main stand replacement

Post by Radek » Thu Dec 28, 2017 7:45 am

Stand moves to the right thats ok, but same way it can move to the left up to 45 angle, (thats what I described moving towards front wheel). I can take some video on phone and place it here later.

User avatar
TommyXP
Staff
Posts: 1181
Joined: Sun May 15, 2011 6:49 am
Location: Marine City, Michigan

Re: Main stand replacement

Post by TommyXP » Thu Dec 28, 2017 8:02 am

Is there a weld or a 'stop' that may have broken off?
Freedom is not something you are given. Its something you take.

Radek
Member
Posts: 5
Joined: Mon Dec 25, 2017 9:28 am

Re: Main stand replacement

Post by Radek » Thu Dec 28, 2017 8:36 am

I think there must have been something to stop that, something to obstruct that unwanted move. I will add some video later so thinks are clear. Thank you for respond,

Radek
Member
Posts: 5
Joined: Mon Dec 25, 2017 9:28 am

Re: Main stand replacement

Post by Radek » Fri Dec 29, 2017 5:25 am

I have downloaded video, but it's refused because of too large. So perhaps I can download it on Youtube and leaf a link here.

User avatar
TommyXP
Staff
Posts: 1181
Joined: Sun May 15, 2011 6:49 am
Location: Marine City, Michigan

Re: Main stand replacement

Post by TommyXP » Fri Dec 29, 2017 5:35 am

Good luck.....
Whatever happened initially to damage the stand obviously caused this problem to occur.
Hope you discover the cause soon.
Freedom is not something you are given. Its something you take.

Post Reply