Center stand spring
- breaknwind
- Member
- Posts: 259
- Joined: Fri Oct 12, 2012 5:14 pm
- Location: Orange Park Florida
Center stand spring
With + 28,000 miles on my SH the center stand clangs at every bump. The rubber stop is still in place. I've had the center stand off once when I replaced the water pump seals. Thinking of replacement soon. Anyone else
- Mikey
- Member
- Posts: 307
- Joined: Wed Jul 20, 2011 3:43 am
- Location: Las Vegas
Re: Center stand spring
Maybe you can just order the parts you need.
- TommyXP
- Staff
- Posts: 1279
- Joined: Sun May 15, 2011 6:49 am
- Location: Marine City, Michigan
Re: Center stand spring
The springs are rusty but no noticeable clanging here...
Freedom is not something you are given. Its something you take.
- breaknwind
- Member
- Posts: 259
- Joined: Fri Oct 12, 2012 5:14 pm
- Location: Orange Park Florida
Re: Center stand spring
I removed the center stand (CS). The main part of the stand has elongated holes from long term use. While installing the collar I noticed this. The clanging noise has lessened now that there's new pivot collars. I no longer have access to a machine shop so I won't be able to salvage it. It'll have to do for now.
Now get this. The CS for the SH is $88. Yet the CS for the BV's I sold are $38.
Now get this. The CS for the SH is $88. Yet the CS for the BV's I sold are $38.