my sh 150 with mivv gp exhaust
- Nikolaidis
- Member
- Posts: 148
- Joined: Thu Jan 24, 2013 2:03 pm
- Location: Athens,Grecce
Re: my sh 150 with mivv gp exhaust
i bought today the racing springs that much on the sh [ red yellow white ] _2912536_ I have put the yellow ones and when i start from the beginning the scooter started in a way to scream with verry little acceleration. If i had put the green ones that there are up to 4000 RPM i can't imagine how much more would be...
Tomorrow i'll try the white ones to see, if the scooter would not scream like crazy i'll kepp them...
Maybe is because of the exhaust.
Tomorrow i'll try the white ones to see, if the scooter would not scream like crazy i'll kepp them...
Maybe is because of the exhaust.
Malossi TC Unit O2 Controller [Lamda Emulator]
Malossi Multivar MHR 9.5gr [RR] Dr.Pulleys with [white] contra spring
Malossi clutch springs [white]
Malossi Rs 24
Mivv Gp
DNA Air/Filter
Malossi Multivar MHR 9.5gr [RR] Dr.Pulleys with [white] contra spring
Malossi clutch springs [white]
Malossi Rs 24
Mivv Gp
DNA Air/Filter
- robber57
- Admin
- Posts: 995
- Joined: Sun Oct 10, 2010 9:24 am
- Location: Heerhugowaard,Holland
Re: my sh 150 with mivv gp exhaust
Thats remarkable...
I have the red ones but in a malossi delta clutch and at the most heavy setting and my engine is absolutely not screaming, yes it makes a bit more rpm compared to standard but it is not all that shocking.
Another user is Bermuda and he also has a delta clutch with the red springs in it, no problem.
You did not by accident smeared grease/dirt on the clutch friction material?
Are you sure you mounted the springs correctly?, are the guide rubbers back in the correct position?
Tip for the next time; after you take of the bell put some paper masking tape on the friction pads so they will stay clean.
I have the red ones but in a malossi delta clutch and at the most heavy setting and my engine is absolutely not screaming, yes it makes a bit more rpm compared to standard but it is not all that shocking.
Another user is Bermuda and he also has a delta clutch with the red springs in it, no problem.
You did not by accident smeared grease/dirt on the clutch friction material?
Are you sure you mounted the springs correctly?, are the guide rubbers back in the correct position?
Tip for the next time; after you take of the bell put some paper masking tape on the friction pads so they will stay clean.
Failure is not an option, it comes bundled with the package.
- Nikolaidis
- Member
- Posts: 148
- Joined: Thu Jan 24, 2013 2:03 pm
- Location: Athens,Grecce
Re: my sh 150 with mivv gp exhaust
It is definitely the exhaust, now that is night and more cold makes less noise.the more high RPM plus the sunny weather & PLUS the Dbkiller make the scooter sound louder.
I went on a mechanic and did the job...
I'll try the white ones tomorrow and i'll give you the results.
I went on a mechanic and did the job...
I'll try the white ones tomorrow and i'll give you the results.
Malossi TC Unit O2 Controller [Lamda Emulator]
Malossi Multivar MHR 9.5gr [RR] Dr.Pulleys with [white] contra spring
Malossi clutch springs [white]
Malossi Rs 24
Mivv Gp
DNA Air/Filter
Malossi Multivar MHR 9.5gr [RR] Dr.Pulleys with [white] contra spring
Malossi clutch springs [white]
Malossi Rs 24
Mivv Gp
DNA Air/Filter
- Nikolaidis
- Member
- Posts: 148
- Joined: Thu Jan 24, 2013 2:03 pm
- Location: Athens,Grecce
Re: my sh 150 with mivv gp exhaust
So i have put the white springs today.
The sh is going better than ever and that's because (1) when i want [open full throttle at the beginning ] goes like an airplane in take of and (2) when i want just to ride slowly i can...
with the yellows i had to obligatorily go full throttle and fast at the beginning or else would scream in the first 0-35 km/h.
anyhow, now i'm satisfied
The sh is going better than ever and that's because (1) when i want [open full throttle at the beginning ] goes like an airplane in take of and (2) when i want just to ride slowly i can...
with the yellows i had to obligatorily go full throttle and fast at the beginning or else would scream in the first 0-35 km/h.
anyhow, now i'm satisfied
Malossi TC Unit O2 Controller [Lamda Emulator]
Malossi Multivar MHR 9.5gr [RR] Dr.Pulleys with [white] contra spring
Malossi clutch springs [white]
Malossi Rs 24
Mivv Gp
DNA Air/Filter
Malossi Multivar MHR 9.5gr [RR] Dr.Pulleys with [white] contra spring
Malossi clutch springs [white]
Malossi Rs 24
Mivv Gp
DNA Air/Filter
- robber57
- Admin
- Posts: 995
- Joined: Sun Oct 10, 2010 9:24 am
- Location: Heerhugowaard,Holland
Re: my sh 150 with mivv gp exhaust
Well done, congratulations.
You may start to notice a pattern: almost no tuned part will give right out of the box 100%, rollers,clutch,gears you may have to play with them to get it just spot on and you will have to go 1 step to far to KNOW that the previous step was correct.
You may start to notice a pattern: almost no tuned part will give right out of the box 100%, rollers,clutch,gears you may have to play with them to get it just spot on and you will have to go 1 step to far to KNOW that the previous step was correct.
Failure is not an option, it comes bundled with the package.
- Nikolaidis
- Member
- Posts: 148
- Joined: Thu Jan 24, 2013 2:03 pm
- Location: Athens,Grecce
Re: my sh 150 with mivv gp exhaust
Thanks>>>>>>>>>>>>>>>>>
Malossi TC Unit O2 Controller [Lamda Emulator]
Malossi Multivar MHR 9.5gr [RR] Dr.Pulleys with [white] contra spring
Malossi clutch springs [white]
Malossi Rs 24
Mivv Gp
DNA Air/Filter
Malossi Multivar MHR 9.5gr [RR] Dr.Pulleys with [white] contra spring
Malossi clutch springs [white]
Malossi Rs 24
Mivv Gp
DNA Air/Filter
- Nikolaidis
- Member
- Posts: 148
- Joined: Thu Jan 24, 2013 2:03 pm
- Location: Athens,Grecce
Re: my sh 150 with mivv gp exhaust
Hey, here is a pic with the dbK changed !
You do not have the required permissions to view the files attached to this post.
Malossi TC Unit O2 Controller [Lamda Emulator]
Malossi Multivar MHR 9.5gr [RR] Dr.Pulleys with [white] contra spring
Malossi clutch springs [white]
Malossi Rs 24
Mivv Gp
DNA Air/Filter
Malossi Multivar MHR 9.5gr [RR] Dr.Pulleys with [white] contra spring
Malossi clutch springs [white]
Malossi Rs 24
Mivv Gp
DNA Air/Filter
- robber57
- Admin
- Posts: 995
- Joined: Sun Oct 10, 2010 9:24 am
- Location: Heerhugowaard,Holland
Re: my sh 150 with mivv gp exhaust
Nice big hole!
Failure is not an option, it comes bundled with the package.
- Nikolaidis
- Member
- Posts: 148
- Joined: Thu Jan 24, 2013 2:03 pm
- Location: Athens,Grecce
Re: my sh 150 with mivv gp exhaust
It gives more aggressiveness ...
Malossi TC Unit O2 Controller [Lamda Emulator]
Malossi Multivar MHR 9.5gr [RR] Dr.Pulleys with [white] contra spring
Malossi clutch springs [white]
Malossi Rs 24
Mivv Gp
DNA Air/Filter
Malossi Multivar MHR 9.5gr [RR] Dr.Pulleys with [white] contra spring
Malossi clutch springs [white]
Malossi Rs 24
Mivv Gp
DNA Air/Filter
- Nikolaidis
- Member
- Posts: 148
- Joined: Thu Jan 24, 2013 2:03 pm
- Location: Athens,Grecce
Re: my sh 150 with mivv gp exhaust
today i order an MHR.i dont know what to do should i cancel the order or should i buy something else. how does it performs since you have ride the scooter for some time with it... i read on a post you were not so impressed.
Malossi TC Unit O2 Controller [Lamda Emulator]
Malossi Multivar MHR 9.5gr [RR] Dr.Pulleys with [white] contra spring
Malossi clutch springs [white]
Malossi Rs 24
Mivv Gp
DNA Air/Filter
Malossi Multivar MHR 9.5gr [RR] Dr.Pulleys with [white] contra spring
Malossi clutch springs [white]
Malossi Rs 24
Mivv Gp
DNA Air/Filter