my sh 150 with mivv gp exhaust

Show off your new bike or favorite routes
User avatar
Nikolaidis
Member
Posts: 148
Joined: Thu Jan 24, 2013 2:03 pm
Location: Athens,Grecce

Re: my sh 150 with mivv gp exhaust

Post by Nikolaidis » Tue Feb 19, 2013 9:47 am

i bought today the racing springs that much on the sh [ red yellow white ] _2912536_ I have put the yellow ones and when i start from the beginning the scooter started in a way to scream with verry little acceleration. If i had put the green ones that there are up to 4000 RPM i can't imagine how much more would be...
Tomorrow i'll try the white ones to see, if the scooter would not scream like crazy i'll kepp them...
Maybe is because of the exhaust.
Malossi TC Unit O2 Controller [Lamda Emulator]
Malossi Multivar MHR 9.5gr [RR] Dr.Pulleys with [white] contra spring
Malossi clutch springs [white]

Malossi Rs 24

Mivv Gp
DNA Air/Filter

User avatar
robber57
Admin
Posts: 995
Joined: Sun Oct 10, 2010 9:24 am
Location: Heerhugowaard,Holland

Re: my sh 150 with mivv gp exhaust

Post by robber57 » Tue Feb 19, 2013 10:02 am

Thats remarkable...
I have the red ones but in a malossi delta clutch and at the most heavy setting and my engine is absolutely not screaming, yes it makes a bit more rpm compared to standard but it is not all that shocking.
Another user is Bermuda and he also has a delta clutch with the red springs in it, no problem.

You did not by accident smeared grease/dirt on the clutch friction material?
Are you sure you mounted the springs correctly?, are the guide rubbers back in the correct position?

Tip for the next time; after you take of the bell put some paper masking tape on the friction pads so they will stay clean.
Failure is not an option, it comes bundled with the package.

User avatar
Nikolaidis
Member
Posts: 148
Joined: Thu Jan 24, 2013 2:03 pm
Location: Athens,Grecce

Re: my sh 150 with mivv gp exhaust

Post by Nikolaidis » Tue Feb 19, 2013 11:27 am

It is definitely the exhaust, now that is night and more cold makes less noise.the more high RPM plus the sunny weather & PLUS the Dbkiller make the scooter sound louder.

I went on a mechanic and did the job...

I'll try the white ones tomorrow and i'll give you the results.
Malossi TC Unit O2 Controller [Lamda Emulator]
Malossi Multivar MHR 9.5gr [RR] Dr.Pulleys with [white] contra spring
Malossi clutch springs [white]

Malossi Rs 24

Mivv Gp
DNA Air/Filter

User avatar
Nikolaidis
Member
Posts: 148
Joined: Thu Jan 24, 2013 2:03 pm
Location: Athens,Grecce

Re: my sh 150 with mivv gp exhaust

Post by Nikolaidis » Thu Feb 21, 2013 7:37 am

So i have put the white springs today.
The sh is going better than ever and that's because (1) when i want [open full throttle at the beginning ] goes like an airplane in take of and (2) when i want just to ride slowly i can...
with the yellows i had to obligatorily go full throttle and fast at the beginning or else would scream in the first 0-35 km/h.

anyhow, now i'm satisfied 8-)
Malossi TC Unit O2 Controller [Lamda Emulator]
Malossi Multivar MHR 9.5gr [RR] Dr.Pulleys with [white] contra spring
Malossi clutch springs [white]

Malossi Rs 24

Mivv Gp
DNA Air/Filter

User avatar
robber57
Admin
Posts: 995
Joined: Sun Oct 10, 2010 9:24 am
Location: Heerhugowaard,Holland

Re: my sh 150 with mivv gp exhaust

Post by robber57 » Thu Feb 21, 2013 9:02 am

Well done, congratulations.

You may start to notice a pattern: almost no tuned part will give right out of the box 100%, rollers,clutch,gears you may have to play with them to get it just spot on and you will have to go 1 step to far to KNOW that the previous step was correct.
Failure is not an option, it comes bundled with the package.

User avatar
Nikolaidis
Member
Posts: 148
Joined: Thu Jan 24, 2013 2:03 pm
Location: Athens,Grecce

Re: my sh 150 with mivv gp exhaust

Post by Nikolaidis » Thu Feb 21, 2013 9:17 am

Thanks>>>>>>>>>>>>>>>>> :D
Malossi TC Unit O2 Controller [Lamda Emulator]
Malossi Multivar MHR 9.5gr [RR] Dr.Pulleys with [white] contra spring
Malossi clutch springs [white]

Malossi Rs 24

Mivv Gp
DNA Air/Filter

User avatar
Nikolaidis
Member
Posts: 148
Joined: Thu Jan 24, 2013 2:03 pm
Location: Athens,Grecce

Re: my sh 150 with mivv gp exhaust

Post by Nikolaidis » Thu Mar 07, 2013 4:05 pm

Hey, here is a pic with the dbK changed !
You do not have the required permissions to view the files attached to this post.
Malossi TC Unit O2 Controller [Lamda Emulator]
Malossi Multivar MHR 9.5gr [RR] Dr.Pulleys with [white] contra spring
Malossi clutch springs [white]

Malossi Rs 24

Mivv Gp
DNA Air/Filter

User avatar
robber57
Admin
Posts: 995
Joined: Sun Oct 10, 2010 9:24 am
Location: Heerhugowaard,Holland

Re: my sh 150 with mivv gp exhaust

Post by robber57 » Fri Mar 08, 2013 3:47 am

Nice big hole!
Failure is not an option, it comes bundled with the package.

User avatar
Nikolaidis
Member
Posts: 148
Joined: Thu Jan 24, 2013 2:03 pm
Location: Athens,Grecce

Re: my sh 150 with mivv gp exhaust

Post by Nikolaidis » Mon Mar 11, 2013 3:28 pm

It gives more aggressiveness ...
Malossi TC Unit O2 Controller [Lamda Emulator]
Malossi Multivar MHR 9.5gr [RR] Dr.Pulleys with [white] contra spring
Malossi clutch springs [white]

Malossi Rs 24

Mivv Gp
DNA Air/Filter

User avatar
Nikolaidis
Member
Posts: 148
Joined: Thu Jan 24, 2013 2:03 pm
Location: Athens,Grecce

Re: my sh 150 with mivv gp exhaust

Post by Nikolaidis » Tue Aug 06, 2013 1:10 pm

today i order an MHR.i dont know what to do should i cancel the order or should i buy something else. how does it performs since you have ride the scooter for some time with it... i read on a post you were not so impressed.
Malossi TC Unit O2 Controller [Lamda Emulator]
Malossi Multivar MHR 9.5gr [RR] Dr.Pulleys with [white] contra spring
Malossi clutch springs [white]

Malossi Rs 24

Mivv Gp
DNA Air/Filter

Post Reply